Block Tower
- Math
Comments
Related to this simulation
Picked by meaning from games, worksheets, simulations, teacher tools and videos.
About this simulation
This simulation turns a pull-and-stack tower game into a lesson on stability. A layer holds only if the center of mass of everything above lies inside the blocks still supporting it. Students drag blocks from the tower to the top and see weak layers glow red. Readouts show height, best height, blocks pulled and the weakest margin. Sliders set the warning range, a toggle hides the glow, and a button rebuilds the tower. Teachers can use it to discuss center of mass, support and risk.
What students can explore
- Drag a side block out of a lower layer and drop it on top, watching the Height readout.
- Turn on Show weak layers and notice which layer glows red after each pull.
- Watch the Weakest margin readout shrink as you remove more blocks from one layer.
- Turn off the glow and rely on reasoning, then compare your Best height.
- Press Rebuild tower after a collapse and test a new removal order.
Learning objectives
- 1Describe how a center of mass above a support decides stability.
- 2Predict which block is safest to remove from a layer.
- 3Explain why removing blocks narrows the support area.
- 4Use a numeric margin to judge risk before acting.
Questions teachers ask
Is the Block Tower simulation free to use?
Yes. It is free, needs no sign-up, and runs in any modern browser, including whiteboards, tablets and phones.
Why does the tower fall?
A stack stays up while the center of mass of everything above a layer lies over that layer's support. When pulled blocks shift the support edge inward, the load lands outside it and the tower tips.
Which blocks are safest to pull?
Blocks on the sides are usually safer than the middle ones, because the center block keeps the layer supported near the center of mass. The red glow and Weakest margin help you check.
How do I move a block?
Drag a block out of the tower, then drop it on the top. After a collapse, press Rebuild tower to start again.
Embed this simulation
Drop it into your LMS, blog, or class site — free.
<iframe src="https://kiwibee.io/en/simulations/block-tower-pull-3d-simulation/embed" title="Block Tower | KiwiBee" loading="lazy" allowfullscreen style="width:100%;height:min(70vh,620px);min-height:420px;border:0;border-radius:16px"></iframe>Curriculum standards
Cambridge
- 6Pf.04Describe the effect of different forces on an object at rest and in motionCambridge Primary Science (0097) — Stage 6 › Physics › Forces and energy
Learning objectives © UCLES (Cambridge University Press & Assessment), quoted with attribution.
Bring interactive science into your classroom
KiwiBee's free teacher workspace brings lesson planning, worksheets, classroom tools, and gradebook together in one place.
Start free and create your first classWatch KiwiBee on YouTube
Short KiwiBee videos for teachers and schools. Subscribe, or follow KiwiBee wherever you are.
