আপনার গোপনীয়তার পছন্দ

প্রাপ্তবয়স্ক দর্শকদের বুঝতে, সম্পন্ন সাইন-আপ পরিমাপ করতে এবং ক্যাম্পেইন উন্নত করতে KiwiBee ঐচ্ছিক Google Analytics, Google Ads ও Meta Pixel কুকি ব্যবহার করে। প্রয়োজনীয় কুকি সবসময় চালু থাকে। OpenAI-এর ChatGPT Ads Pixel বিজ্ঞাপনের সম্মতির পরে পৃষ্ঠা দেখা ও জমা দেওয়া অনুসন্ধানও পরিমাপ করে এবং মিল খোঁজার জন্য হ্যাশ করা যোগাযোগের তথ্য ব্যবহার করতে পারে। গোপনীয়তা নীতি

মূল কনটেন্টে যান

Block Tower

  • গণিত
—

এই সিমুলেশনের সাথে সম্পর্কিত

গেম, ওয়ার্কশিট, সিমুলেশন, শিক্ষকের সরঞ্জাম ও ভিডিও থেকে অর্থ মিলিয়ে বাছাই করা।

এই সিমুলেশন সম্পর্কে

This simulation turns a pull-and-stack tower game into a lesson on stability. A layer holds only if the center of mass of everything above lies inside the blocks still supporting it. Students drag blocks from the tower to the top and see weak layers glow red. Readouts show height, best height, blocks pulled and the weakest margin. Sliders set the warning range, a toggle hides the glow, and a button rebuilds the tower. Teachers can use it to discuss center of mass, support and risk.

শিক্ষার্থীরা কী অনুসন্ধান করতে পারে

  • Drag a side block out of a lower layer and drop it on top, watching the Height readout.
  • Turn on Show weak layers and notice which layer glows red after each pull.
  • Watch the Weakest margin readout shrink as you remove more blocks from one layer.
  • Turn off the glow and rely on reasoning, then compare your Best height.
  • Press Rebuild tower after a collapse and test a new removal order.

শিখন উদ্দেশ্য

  1. 1Describe how a center of mass above a support decides stability.
  2. 2Predict which block is safest to remove from a layer.
  3. 3Explain why removing blocks narrows the support area.
  4. 4Use a numeric margin to judge risk before acting.

শিক্ষকদের সাধারণ প্রশ্ন

Is the Block Tower simulation free to use?

Yes. It is free, needs no sign-up, and runs in any modern browser, including whiteboards, tablets and phones.

Why does the tower fall?

A stack stays up while the center of mass of everything above a layer lies over that layer's support. When pulled blocks shift the support edge inward, the load lands outside it and the tower tips.

Which blocks are safest to pull?

Blocks on the sides are usually safer than the middle ones, because the center block keeps the layer supported near the center of mass. The red glow and Weakest margin help you check.

How do I move a block?

Drag a block out of the tower, then drop it on the top. After a collapse, press Rebuild tower to start again.

এই সিমুলেশন এমবেড করুন

আপনার এলএমএস, ব্লগ বা ক্লাসের সাইটে বসিয়ে দিন — বিনামূল্যে।

<iframe src="https://kiwibee.io/bn/simulations/block-tower-pull-3d-simulation/embed" title="Block Tower | KiwiBee" loading="lazy" allowfullscreen style="width:100%;height:min(70vh,620px);min-height:420px;border:0;border-radius:16px"></iframe>

পাঠ্যক্রমের মানদণ্ড

Cambridge

Learning objectives © UCLES (Cambridge University Press & Assessment), quoted with attribution.

ইন্টারঅ্যাকটিভ বিজ্ঞান আপনার শ্রেণিকক্ষে নিয়ে আসুন

KiwiBee-এর বিনামূল্যের শিক্ষক কর্মক্ষেত্র পাঠ পরিকল্পনা, ওয়ার্কশিট, শ্রেণিকক্ষের সরঞ্জাম ও গ্রেডবুক এক জায়গায় নিয়ে আসে।

বিনামূল্যে শুরু করুন এবং আপনার প্রথম ক্লাস তৈরি করুন

অথবা শিক্ষক কর্মক্ষেত্র ঘুরে দেখুন →