Circuit Builder
- 物理
评论
与此模拟实验相关
按含义从游戏、练习册、模拟实验、教师工具和视频中挑选。
关于这个模拟实验
Students drag parts into slot 1, which is in series with the battery, and slots 2 and 3, which are two parallel branches. They click the switch to open or close the circuit and use a slider to set the battery between 1.5 and 12 volts. Readouts show battery voltage, total current, total power and total resistance, and bulbs glow according to their power. An empty slot is a gap, and above about 7.2 V a 4.5 V bulb burns out. Teachers can compare series and parallel brightness and apply V = I x R.
学生可以探索什么
- Place one bulb in slot 1 and close the switch, then read Total current I and Total resistance.
- Add a second bulb in series and notice how both bulbs dim as the resistance grows.
- Fill the two parallel slots with bulbs and compare their brightness with the series version.
- Leave one slot empty to see a gap stop the current, or fill it with a wire piece.
- Raise the Battery slider past about 7 V to burn a bulb, then press Replace burnt bulbs.
学习目标
- 1Compare current and brightness in series and parallel arrangements.
- 2Apply V = I x R and P = V x I to readings from the circuit.
- 3Explain why adding bulbs in series raises total resistance.
- 4Describe how excess voltage damages a bulb filament.
教师常问的问题
Is it free to use?
Yes. It is completely free, needs no sign-up, and runs in any modern browser, including classroom whiteboards, tablets and phones. Just open the page and start.
Why are bulbs dimmer in series?
In series the battery voltage is shared between the bulbs and the total resistance is higher, so less current flows through all of them. In parallel each branch gets the full voltage.
How do I build the circuit?
Drag a bulb or wire piece into one of the three slots, click the switch to close the circuit, and move the Battery slider to change the voltage. Watch the readouts for current and power.
What does an empty slot do?
An empty series slot is a gap, so no current flows at all. An empty parallel slot just removes that branch, while the other branch keeps working. A wire piece fills a slot with almost no resistance.
嵌入这个模拟实验
免费嵌入你的学习平台、博客或班级网站。
<iframe src="https://kiwibee.io/zh-cn/simulations/circuit-builder-bulbs-3d-simulation/embed" title="Circuit Builder | KiwiBee" loading="lazy" allowfullscreen style="width:100%;height:min(70vh,620px);min-height:420px;border:0;border-radius:16px"></iframe>课程标准
Cambridge
- 9Pe.01Describe how current divides in parallel circuits.Cambridge Lower Secondary Science (0893) — Stage 9 › Physics › Electricity and magnetism
- 9Pe.02Know how to measure current and voltage in series and parallel circuits, and describe the effect of adding cells and lamps.Cambridge Lower Secondary Science (0893) — Stage 9 › Physics › Electricity and magnetism
Learning objectives © UCLES (Cambridge University Press & Assessment), quoted with attribution.
把互动科学带进你的课堂
KiwiBee 的免费教师工作台把备课、工作表、课堂工具和成绩册集中在一处。
免费开始,创建你的第一个班级在 YouTube 上观看 KiwiBee
面向教师和学校的 KiwiBee 短视频。订阅频道,或在你常用的平台上关注 KiwiBee。
