Block Tower
- Toán học
Bình luận
Liên quan đến mô phỏng này
Chọn theo nội dung từ trò chơi, phiếu bài tập, mô phỏng, công cụ giáo viên và video.
Giới thiệu mô phỏng này
This simulation turns a pull-and-stack tower game into a lesson on stability. A layer holds only if the center of mass of everything above lies inside the blocks still supporting it. Students drag blocks from the tower to the top and see weak layers glow red. Readouts show height, best height, blocks pulled and the weakest margin. Sliders set the warning range, a toggle hides the glow, and a button rebuilds the tower. Teachers can use it to discuss center of mass, support and risk.
Học sinh có thể khám phá điều gì
- Drag a side block out of a lower layer and drop it on top, watching the Height readout.
- Turn on Show weak layers and notice which layer glows red after each pull.
- Watch the Weakest margin readout shrink as you remove more blocks from one layer.
- Turn off the glow and rely on reasoning, then compare your Best height.
- Press Rebuild tower after a collapse and test a new removal order.
Mục tiêu học tập
- 1Describe how a center of mass above a support decides stability.
- 2Predict which block is safest to remove from a layer.
- 3Explain why removing blocks narrows the support area.
- 4Use a numeric margin to judge risk before acting.
Câu hỏi giáo viên thường đặt ra
Is the Block Tower simulation free to use?
Yes. It is free, needs no sign-up, and runs in any modern browser, including whiteboards, tablets and phones.
Why does the tower fall?
A stack stays up while the center of mass of everything above a layer lies over that layer's support. When pulled blocks shift the support edge inward, the load lands outside it and the tower tips.
Which blocks are safest to pull?
Blocks on the sides are usually safer than the middle ones, because the center block keeps the layer supported near the center of mass. The red glow and Weakest margin help you check.
How do I move a block?
Drag a block out of the tower, then drop it on the top. After a collapse, press Rebuild tower to start again.
Nhúng mô phỏng này
Đặt vào hệ thống học tập, blog hoặc trang lớp của bạn — miễn phí.
<iframe src="https://kiwibee.io/vn/simulations/block-tower-pull-3d-simulation/embed" title="Block Tower | KiwiBee" loading="lazy" allowfullscreen style="width:100%;height:min(70vh,620px);min-height:420px;border:0;border-radius:16px"></iframe>Chuẩn chương trình học
Cambridge
- 6Pf.04Describe the effect of different forces on an object at rest and in motionCambridge Primary Science (0097) — Stage 6 › Physics › Forces and energy
Learning objectives © UCLES (Cambridge University Press & Assessment), quoted with attribution.
Mang khoa học tương tác vào lớp học của bạn
Không gian giáo viên miễn phí của KiwiBee gộp soạn bài, phiếu bài tập, công cụ lớp học và sổ điểm vào cùng một nơi.
Bắt đầu miễn phí và tạo lớp học đầu tiênXem KiwiBee trên YouTube
Video ngắn về KiwiBee dành cho giáo viên và nhà trường. Hãy đăng ký kênh, hoặc theo dõi KiwiBee ở bất cứ đâu.
