Block Tower
- गणित
टिप्पणियाँ
इस सिमुलेशन से जुड़ा
खेल, वर्कशीट, सिमुलेशन, शिक्षक उपकरण और वीडियो में से अर्थ के आधार पर चुना गया।
इस सिमुलेशन के बारे में
This simulation turns a pull-and-stack tower game into a lesson on stability. A layer holds only if the center of mass of everything above lies inside the blocks still supporting it. Students drag blocks from the tower to the top and see weak layers glow red. Readouts show height, best height, blocks pulled and the weakest margin. Sliders set the warning range, a toggle hides the glow, and a button rebuilds the tower. Teachers can use it to discuss center of mass, support and risk.
विद्यार्थी क्या खोज सकते हैं
- Drag a side block out of a lower layer and drop it on top, watching the Height readout.
- Turn on Show weak layers and notice which layer glows red after each pull.
- Watch the Weakest margin readout shrink as you remove more blocks from one layer.
- Turn off the glow and rely on reasoning, then compare your Best height.
- Press Rebuild tower after a collapse and test a new removal order.
अधिगम उद्देश्य
- 1Describe how a center of mass above a support decides stability.
- 2Predict which block is safest to remove from a layer.
- 3Explain why removing blocks narrows the support area.
- 4Use a numeric margin to judge risk before acting.
शिक्षकों के आम सवाल
Is the Block Tower simulation free to use?
Yes. It is free, needs no sign-up, and runs in any modern browser, including whiteboards, tablets and phones.
Why does the tower fall?
A stack stays up while the center of mass of everything above a layer lies over that layer's support. When pulled blocks shift the support edge inward, the load lands outside it and the tower tips.
Which blocks are safest to pull?
Blocks on the sides are usually safer than the middle ones, because the center block keeps the layer supported near the center of mass. The red glow and Weakest margin help you check.
How do I move a block?
Drag a block out of the tower, then drop it on the top. After a collapse, press Rebuild tower to start again.
इस सिमुलेशन को एम्बेड करें
इसे अपने एलएमएस, ब्लॉग या कक्षा की वेबसाइट पर लगाएँ — मुफ़्त।
<iframe src="https://kiwibee.io/hi/simulations/block-tower-pull-3d-simulation/embed" title="Block Tower | KiwiBee" loading="lazy" allowfullscreen style="width:100%;height:min(70vh,620px);min-height:420px;border:0;border-radius:16px"></iframe>पाठ्यक्रम मानक
Cambridge
- 6Pf.04Describe the effect of different forces on an object at rest and in motionCambridge Primary Science (0097) — Stage 6 › Physics › Forces and energy
Learning objectives © UCLES (Cambridge University Press & Assessment), quoted with attribution.
इंटरैक्टिव विज्ञान को अपनी कक्षा में लाएँ
KiwiBee का मुफ़्त शिक्षक कार्यक्षेत्र पाठ योजना, वर्कशीट, कक्षा उपकरण और ग्रेडबुक — सब एक ही जगह लाता है।
मुफ़्त शुरू करें और अपनी पहली कक्षा बनाएँYouTube पर KiwiBee देखें
शिक्षकों और स्कूलों के लिए KiwiBee के छोटे वीडियो। सब्सक्राइब करें, या जहाँ भी आप हों, KiwiBee को फ़ॉलो करें।
