Seesaw Balance
- Fizikë
Komente
Lidhur me këtë simulim
Zgjedhur sipas kuptimit nga lojërat, fletët e punës, simulimet, mjetet për mësuesit dhe videot.
Rreth këtij simulimi
This simulation shows the law of the lever on a 10 meter plank. Students drag each block to a new spot, snapping to half-meter marks, and click a block to make it heavier. The plank tilts in proportion to the net torque, and readouts compare left and right torque so learners can see when they are equal. Teachers can pose balancing challenges, such as making a 2 kg block balance a 1 kg block, then ask students to explain the mass times distance rule. Sliders adjust the maximum tilt and turn snapping on or off.
Çfarë mund të eksplorojnë nxënësit
- Drag one block to the far left end and another to the right until the Plank readout says it is level.
- Click a block to make it heavier, then move it closer to the pivot to restore balance.
- Compare the Left torque and Right torque readouts while you slide a block half a meter at a time.
- Turn off Snap to marks and try to balance the plank at an in-between position.
- Raise Max tilt to 30 degrees to see how strongly an unbalanced plank swings.
Objektivat e të nxënit
- 1State that a lever balances when mass times distance is equal on both sides.
- 2Predict where to place a heavier block so the plank stays level.
- 3Explain why doubling a mass allows its distance to be halved.
- 4Use torque readouts as evidence to check a balancing prediction.
Pyetjet që bëjnë mësuesit
Is the Seesaw Balance simulation free to use?
Yes. It is free, needs no sign-up, and runs in any modern browser, including classroom whiteboards, tablets and phones.
Why does the seesaw balance when the weights are different?
Balance depends on torque, which is mass times distance from the pivot. A heavy block close to the pivot can balance a light block far from it when the two products are equal.
How do I move and change the blocks?
Drag a block along the plank to reposition it. Click a block to make it heavier. Watch the Left torque, Right torque and Plank readouts to see whether it is level.
What is the pivot in this simulation?
The pivot, or fulcrum, is the single support point under the middle of the plank. Distances are measured from it, and the plank turns about this point.
Vendoseni këtë simulim në faqen tuaj
Vendoseni në platformën tuaj mësimore, në blog ose në faqen e klasës — falas.
<iframe src="https://kiwibee.io/sq/simulations/seesaw-balance-3d-simulation/embed" title="Seesaw Balance | KiwiBee" loading="lazy" allowfullscreen style="width:100%;height:min(70vh,620px);min-height:420px;border:0;border-radius:16px"></iframe>Sillni shkencën interaktive në klasën tuaj
Hapësira falas e mësuesit në KiwiBee bashkon në një vend planifikimin e mësimit, fletët e punës, mjetet e klasës dhe regjistrin e notave.
Filloni falas dhe krijoni klasën tuaj të parëShikoni KiwiBee në YouTube
Video të shkurtra të KiwiBee për mësuesit dhe shkollat. Abonohuni, ose ndiqni KiwiBee kudo që jeni.
